Firmware for Digital Instruments, Digitisers and Acquisition Systems

  • Minimusâ‚‚
  • Minimus Lite

The Minimusâ‚‚ and Minimus Lite both run dig2 firmware.
  • Minimus
  • Minimus+
  

The Minimus and Minimus+ both run dig firmware.
  • Fortimus

The Fortimus digital accelerometer contains a Minimus digitiser which runs dig firmware.
  • Certimus

The Certimus digital seismometer contains a Minimus digitiser which runs dig firmware.
  • Affinity

The Affinity vault-quality digitiser runs Platinum firmware.
  • NAM Mk2

The NAM Mk2 data acquisition system runs Platinum firmware.
  • NAM Mk1

The NAM Mk1 data acquisition system runs Platinum firmware.
  • DM24S3
  • DM24S6

The DM24S3 and DM24S6 digitisers both run DM24 firmware.
  • DM24S3EAM
  • DM24S3AM
  • DM24S6EAM
  • DM24S6AM

or

These systems each contain two internal modules: a DM24 and an EAM. The EAM runs Platinum firmware:

Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
  • 3TDE

This instrument contains two internal digital modules: a DM24 digitiser and an EAM acquisition module. The EAM runs Platinum firmware:

Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
  • 3ESPCDE

This instrument contains two internal digital modules: a digitiser and an EAM acquisition module. The EAM runs Platinum firmware:

The digitiser may be a CD24 or a DM24 but, in either case, you should always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal digitiser module:
  • 40TDE

This instrument contains two internal digital modules: a DM24 digitiser and an EAM acquisition module. The EAM runs Platinum firmware:

Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
  • 5TCDE

This instrument contains two internal digital modules: a DM24 digitiser and an EAM acquisition module. The EAM runs Platinum firmware:

Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
  • EAM

The EAM data acquisition system runs Platinum firmware.
  • DCM

The DCM data acquisition system runs Platinum firmware.
  • 3ESPCD
    with CD24

The 3ESPCD was offered with choice of two digitisers: a DM24 or a CD24. Models with a CD24 have a 19-pin connector on the lid for a break-out box (CD24 break-out box showing DATA, GPS and POWER connectors). The DATA and GPS connectors are on the break-out box, not on the instrument. The digitisers in the CD24 variant run CD24 firmware:
  • 3ESPCD
    with DM24

The 3ESPCD was offered with choice of two digitisers: a DM24 or a CD24. Models with a DM24 have DATA and GPS connectors on the lid of the instrument itself. The digitisers in the DM24 variant run DM24 firmware:
  • 6TD

The 6TD has an internal CD24 digitiser, which runs CD24 firmware:
  • CD24

The CD24 digitiser runs CD24 firmware: